Processing Film

TL;DR

  1. Load the film into the tank
  2. Wash
  3. Develop
  4. Stop
  5. Fix
  6. Wash
  7. Clean
  8. Wash
  9. Wet

Loading the Film Into Tank

  1. Turn off the light
  2. Take out the film from the canister
  3. Cut out the film leader - smooth end
  4. Find the tabs on the spool that mark the entrance of the spiral
  5. Slide the film in, locked past the sprocket
  6. Rotate one side of the spool
  7. Cut the end of the spool - smooth end
  8. Place the spool over the post, then into the tank
  9. Place the funnel on
  10. Place the lid on, vacuum seal it by pushing some air out